Special Cable RS232 To USB Solar Assistant & Voltacon Inverter Compatible Solar Inverter The side labeled 'CAN-bus BMS'

The side labeled 'CAN-bus BMS' plugs into the battery

This is a pair of genuine MC4 connectors (male/female) with an integrated fuse rated at 20A

To give an idea of how much power the Lynx modules are rated at different voltages

Single phase three wire

One 240V 5kVA inverter with a 32A Autotransformer will supply up to 21A of balanced load to each 120V leg

Special Cable RS232 To USB Solar Assistant & Voltacon Inverter Compatible Solar Inverter The side labeled 'CAN-bus BMS'For transferring data between Voltacon inverters and Raspberry PI 3 LTS. 2 meters RS232 (RJ45 port) to USB cable. This USB cable is used to connect Voltronic inverters to SolarAssistant via the RS232 port: Voltacon Axpert Kodak Mecer MPP Solar Phocos RCT Full Circle Solar The Sun Pays etc. If you have multiple more than 2 inverters it is recommended to use one cable for each inverter. The Orange PI 3 LTS has 2 USB, it is necessary to connect a USB hub